Surviving My First DIY GMT Watch Construct: A Beginner’s Journey with Namoki Mods

First Time Constructing a Watch from Namoki Mods

I’ve by no means constructed a watch earlier than, however I’ve a modded watch from buddy of mine who constructed a look ahead to me from the specs and elements I wished in that particular watch. However right now, I’m going to try to construct my very first watch from our good associates over at Namoki Mods.

So, thanks a lot for sending this over. What you’re about to learn is a real-time play-by-play of my DIY GMT Watch Construct. Strap in (pun meant)!

Let’s Examine Out What’s within the Field

We’re going to construct a GMT right now. So, it seems to be like we now have our watch instruments and elements.

I’m acquainted with this cuz I’ve a really related watch-making toolset that appears similar to this. So, let’s simply get into it.

All proper, we now have our motion proper right here, our dial right here, and the case itself, so truly, I’m going to go away this out simply so we now have it prepared, and there’s our bezel.

Now, we simply must put this all collectively and hope we don’t mess something up.

Beginning with the Bezel Set up

The 1st step is bezel set up. It’s like placing collectively Ikea stuff, proper? Okay, I already screwed this up. That is going to require much more focus than I believed.

All proper, let’s align this bezel as finest as we will. Okay, that’s good for now. It’s a 120-click bezel, so it’s slightly forgiving. We are able to form of appropriate our errors, which I’m fairly certain I did.

Coping with the Trim – This Will get Tough

All proper, let’s transfer on to step two, trim. This step form of scares me essentially the most. It doesn’t appear like they gave us some kind of trim instrument right here. It seems to be prefer it desires us to take the motion out and the dial.

All proper, let’s get this dial rigorously out of its case. Okay, so it seems to be like they don’t actually give us this instrument right here. Principally, we simply have to chop the precise ft off.

I do know I ought to be utilizing finger cots, but it surely’s okay, it’s my first construct. If it’s unhealthy, it’s a studying expertise, proper?

How will we trim this? There’s no method which you can trim it with the pry instrument they included. I heard some individuals saying that what they do is that they bend it, however I’m unsure in the event that they bend it with these tweezers simply to mainly – let’s see.

Okay, hey, I believe that labored! All proper, let’s simply do the identical factor with the opposite ft. Take a look at that, it’s nice!

The Nerve-Wracking Hand Set up

All proper, so step three – oh boy, this one makes me slightly bit nervous. I actually don’t need to bend the fingers, however I’ve a sense that as a result of it’s my first time, I simply would possibly.

So, let’s see how this works. So it says to rotate the crown clockwise in time setting mode and cease when the date wheel rolls to the following day.

Okay, so mainly I’m simply turning this till it turns to the primary. Press the GMT hand loosely into place – you solely safe it after checking alignment. Okay, all proper, right here we go. First hand GMT, fortunately this man is a extremely large fats boy.

I imply clearly, like me, like a number of freshmen, you don’t know what instruments to make use of and what’s what cuz I believed you may need to make use of a pad factor to see every little thing, however that’s not the case. Align this man, let’s give it a pleasant little press.

I believe I obtained it. Raise it up slightly bit – it’s not 100% aligned. We additionally bent the fingers and we’re not even on the onerous fingers but. That is the place issues will get slightly bit tougher because the fingers we’re coping with are a lot finer.

Wrestling with the Crown and Stem

Time to put the hour fingers. Oh, thank goodness every little thing aligns. Virtually there, nearly there. Okay, so it seems to be like we’re going to must take out the stem whereas every little thing is in there.

We don’t have the precise holder for it – we’ll work with what we now have. You realize what, I’m going to ask my spouse to assist.

In any case, we obtained out the stem. Apparently, you’re imagined to – it doesn’t say within the directions, but it surely says to launch the stem as soon as once more, but it surely doesn’t inform you that you simply’re imagined to launch it whereas it’s within the winding place—a really large factor to know.

Now it says to put in the again motion again into the case, aligning the interior crown tube with the stem opening onto the motion. I really feel like I’m rising a zit on the underside of my chin simply doing this cuz I don’t need to mess issues up right here.

Okay, I assume we’re going to only drop this man in right here. Nope, it’s not absolutely seated. To start with, I used the flawed instrument. Okay, I believe we’re all seated now, which is nice.

Subsequent up in my DIY GMT Watch Construct, we’re able to insert the crown stem into the crown and twist it clockwise to tighten. Pop it in right here. It says right here to dimension the GMT hand.

I really feel like I’m lacking one thing right here. I really feel just like the stem is simply too lengthy.

So it’s bizarre, proper? Cuz it says to insert crown stem, twist clockwise to tighten. It has a pleasant springy to it, nonetheless, what’s occurring right here? You realize what, I don’t understand how I did it, but it surely ended up working.

So I believe that actually took half-hour simply making an attempt to – like I stated, I’m clearly not constructed for this, however we someway obtained the stem and the crown working. It’s screwed down, every little thing’s excellent.

Lastly, the Straightforward Half – Gasket and Ultimate Meeting

Lastly, in spite of everything that noobness, let’s set up this gasket. Now, this half is the best a part of this complete mod; it’s simply tightening issues down. Superior! Nicely, there it’s. It’s executed!

I may need to return to repair the fingers, however proper now, I’m simply blissful that I’ve spent the final nearly two and a half hours placing this watch collectively.

The toughest half clearly was the fingers, particularly that second hand and simply getting every little thing aligned, however I’ve to say it’s wanting good for essentially the most half.

That’s the Namoki mod proper there. In addition they included rubber straps, which, I imply, I’m probably not a fan of, I’ll most likely swap them out. Altering straps is the extent of my data. Oh, fortunately, there’s a terrific fast launch. That’s what you get with this DIY watchmaking package.

Watch This Assessment

Ultimate Ideas on the DIY Watch Equipment

Individuals are saying that they need this was slightly bit extra clear, and I completely agree with that as properly. I believe I used to be just a bit confused at some steps on what instruments precisely to make use of, and particularly putting in that motion.

I believe it is a nice package for individuals simply stepping into it who know slightly factor or two about modding. Possibly they watch a number of modding movies – that basically helps rather a lot.

Personally, I don’t do this, however to my fellow modder associates on the market, kudos to you guys as a result of it’s fairly a bit of labor. Nevertheless it was expertise to get my fingers soiled and put collectively a watch.

So, I hope you guys loved this DIY GMT Watch Construct. Possibly I’ll get higher the second time round. So till subsequent time, I’m Chris from Clicky Bezel, and I hope to see you quickly!

From a younger age, I used to be hooked on watches. My dad and uncle have been each collectors, and I couldn’t resist the attract of their timepieces. Nevertheless it wasn’t till I stumbled upon a Casio digital calculator watch in school that I really fell in love. (I initially purchased the watch to finish my Again to the Future costume for an 80’s-themed occasion)

It wasn’t till the discharge of the Swatch Moonswatch watches that Clicky Bezel got here to fruition. My spouse (bless her coronary heart) had been bugging me for years to start out a YouTube channel, and I lastly caved in with my first video protecting my expertise tenting over 16 hours for the hyped-up Moonswatches. 

In a comparatively quick time, I’ve been fortunate sufficient to attach and collaborate with some large gamers within the business, together with Nomos Glashütte, Jomashop, Minase, and now Fashionbeans.  To be taught extra about my ardour, discover my content material right here on fashionbeans.com, comply with my Youtube web page: or go to my web site at: